江苏(木屑颗粒机)山东新型无减速机款木屑颗粒机

wangqiang3年前 (2022-06-24)新闻动态1326

1.颗粒机进料口、拨料系统外壳采用不锈钢材质，高强度、抗磨、耐腐蚀；出料口位[文]置可随意选择.

2.电机：业内首创生物质颗粒机专用电机，电机采用了高剩磁的钕铁硼稀土永磁材料[章]，功率密度高，电机尺寸比同性能三相异步电机缩小了约 45%，永磁体可耐受最高工作温度180℃，最高温度下失磁率低于5%，可长期稳[来]定运行。

3.颗粒机电动机直接驱动主轴，无需采用减速机传动，设备在运行过程中，低噪音、[自]高效率，故障率低，生产成本低。

4.整机结构紧凑，配置地脚支撑，稳固了机构重心，并且可根据环境配置管道通风冷[颗]却系统或者独立风机冷却系统。

5.颗粒机配有变频器控制模块，相比三相异步电机，可在 25%-100%负载区间保持90%以上的运行效率，长时间运行比传统三相异步电机综合省电10%~30%。且具备启动电流冲击小的特性，使[粒]得电机绝缘体系得到更好的保护，延长电机的使用寿命。

6.电机配有多种保护措施，有闭环控制回路、温控系统等，保障了电机的安全稳定运[机]行。

1.The cover of the inlet and pellets collecting system of the pellet machine is made of stainless steel with high strength, anti-wear and corrosion resistance. The position of the outlet can be chosen at will.

2. The industrys first special motor for biomass pellet machine,

the motor adopts high remanence NdFeB rare earth permanent magnet material with high power density. The motor size is reduced by about 45% compared with the same performance three-phase asynchronous motor. The permanent magnet can withstand the maximum working temperature of 180 °C, The demagnetization rate is less than 5% and it can operate stably for a long time under the highest temperature.

3. The motor drives the spindle directly, no need to use the reducer to drive.It is low noise, high efficiency, low failure rate and low production cost.

4. Compact structure, equipped with foot support, to stabilize the center of gravity of the mechanism. The duct ventilation cooling system or the independent fan cooling system can be configured according to the environment.

5. It is equipped with a frequency converter control module. Compared with the three-phase asynchronous motor, it can maintain more than 90% operating efficiency in the 25%-100% load range. The long-term operation is 10%~30% more than the traditional three-phase asynchronous motor. It also has the characteristics of small starting current impact, which makes the motor insulation system better protected and prolongs the service life of the motor.

6.The motor is equipped with various protection measures, such as closed-loop controlloop and temperature control system to ensure the safe and stable operation ofthe motor.